D-Link Smart Managed 24-Port Gigabit PoE Switch with 4 SFP Slots DGS-1210-28P

KWD92.000

The DGS-1210 Series is the latest generation of D-Link Gigabit Smart Managed Switches featuring D-Link Green 3.0 technology. The switches comply with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configuration features ensures your network remains protected after an upgrade from IPv4 to IPv6.

Quantity

  • Security policy Security policy
  • Delivery policy Delivery policy
  • Return policy Return policy

Technical Specifications

General

Port Standards & Functions
• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX (Fast Ethernet)
• IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)
• IEEE 802.3x Flow Control for Full-Duplex Mode
• IEEE 802.3af compliance (DGS-1210-28P only)
• Auto-negotiation

Number of Ports

• DGS-1210-28P:
     • 24 10/100/1000BASE-T PoE
     • 4 SFP 

Network Cables
• UTP Cat.5, Cat.5e (100m max)
• EIA/TIA-568 100-ohm STP (100m max)

Full/Half Duplex
• Full/half duplex for 10/100Mbps speeds
• Full duplex for Gigabit speed

Media Interface Exchange
• Auto or configurable MDI/MDI-X

Performance

Switching Capacity

• DGS-1210-28P:  56 Gbps

Transmission Method
• Store-and-forward

MAC Address Table
• 16,000 entries per device

MAC Address Update
• Up to 256 static MAC entries
• Enable/disable auto-learning of MAC addresses

Maximum 64 bytes packet forwarding rate

• DGS-1210-28P:  41.7 Mpps

Packet Buffer Memory

• DGS-1210-28P:  1.5 MB

Power over Ethernet - DGS-1210-10P, -28P, -52MP only

PoE Standard
• IEEE 802.3af & IEEE 802.3at

PoE Capable Ports

• DGS-1210-28P:  
     • Ports 1 to 4: Up to 30W
     • Ports 5 to 24: Up to 15.4W

Physical and Environmental

AC Input
• 100 to 240 VAC 50/60Hz internal universal power supply

Maximum Power Consumption

• DGS-1210-28P:  251.3W (PoE on) / 21.9W (PoE off)

4 Items